Error

Manfred · December 21, 2010, 09:02:48 PM

Getting ERROR: INVALID PAGE FORMAT on many groups
that worked fine before.
Other groups still work

Whats up ?

Manfred · December 22, 2010, 03:33:29 PM

Whats the problem?

12/22/2010 10:30:57 AM > Set group's info (3_in_1_Lathe_Mill_Drill)
12/22/2010 10:30:57 AM > Authorization started
12/22/2010 10:30:59 AM > Authorization accomplished
12/22/2010 10:30:59 AM > Request number of messages
12/22/2010 10:31:00 AM > Error : Invalid page format.
12/22/2010 10:31:00 AM > Set group's info (AA_109_Lathe_Users_Group)
12/22/2010 10:31:00 AM > Authorization started
12/22/2010 10:31:02 AM > Authorization accomplished
12/22/2010 10:31:02 AM > Request number of messages
12/22/2010 10:31:03 AM > Error : Invalid page format.
12/22/2010 10:31:03 AM > Set group's info (atlas_craftsman)
12/22/2010 10:31:03 AM > Authorization started
12/22/2010 10:31:05 AM > Authorization accomplished
12/22/2010 10:31:05 AM > Request number of messages
12/22/2010 10:31:07 AM > Number of messages : 66440
12/22/2010 10:31:07 AM > Receive message : 66427
12/22/2010 10:31:08 AM > Received message from : Warren D.
12/22/2010 10:31:08 AM > Receive message : 66428
12/22/2010 10:31:08 AM > Received message from : Rick Sparber
12/22/2010 10:31:09 AM > Receive message : 66429
12/22/2010 10:31:09 AM > Received message from : Scott Henion
12/22/2010 10:31:10 AM > Receive message : 66430
12/22/2010 10:31:10 AM > Received message from : JR Hurd
12/22/2010 10:31:11 AM > Receive message : 66431
12/22/2010 10:31:11 AM > Received message from : James Irwin
12/22/2010 10:31:12 AM > Receive message : 66432
12/22/2010 10:31:12 AM > Received message from : Scott Henion
12/22/2010 10:31:13 AM > Receive message : 66433
12/22/2010 10:31:13 AM > Received message from : Starlight Tool Services Ltd
12/22/2010 10:31:13 AM > Receive message : 66434
12/22/2010 10:31:13 AM > Received message from : toy264
12/22/2010 10:31:14 AM > Receive message : 66435
12/22/2010 10:31:14 AM > Received message from : toy264
12/22/2010 10:31:15 AM > Receive message : 66436
12/22/2010 10:31:15 AM > Received message from : c_h_a_r_t_n_y
12/22/2010 10:31:16 AM > Receive message : 66437
12/22/2010 10:31:16 AM > Received message from : jerdal@...>
12/22/2010 10:31:16 AM > Receive message : 66438
12/22/2010 10:31:16 AM > Received message from : jo barden
12/22/2010 10:31:17 AM > Receive message : 66439
12/22/2010 10:31:17 AM > Received message from : c_h_a_r_t_n_y
12/22/2010 10:31:18 AM > Receive message : 66440
12/22/2010 10:31:18 AM > Received message from : Bruce Freeman
12/22/2010 10:31:19 AM > Set group's info (Atlasshaperandmillingmachineusersgroup)
12/22/2010 10:31:19 AM > Authorization started
12/22/2010 10:31:21 AM > Authorization accomplished
12/22/2010 10:31:21 AM > Request number of messages
12/22/2010 10:31:23 AM > Error : Invalid page format.
12/22/2010 10:31:23 AM > Set group's info (BurkeMills)
12/22/2010 10:31:23 AM > Authorization started
12/22/2010 10:31:25 AM > Authorization accomplished
12/22/2010 10:31:25 AM > Request number of messages
12/22/2010 10:31:26 AM > Number of messages : 5031
12/22/2010 10:31:26 AM > Set group's info (clausing_lathe_and_mill)
12/22/2010 10:31:26 AM > Authorization started
12/22/2010 10:31:28 AM > Authorization accomplished
12/22/2010 10:31:28 AM > Request number of messages
12/22/2010 10:31:29 AM > Error : Invalid page format.
12/22/2010 10:31:29 AM > Set group's info (gingery_machines)
12/22/2010 10:31:29 AM > Authorization started
12/22/2010 10:31:31 AM > Authorization accomplished
12/22/2010 10:31:31 AM > Request number of messages
12/22/2010 10:31:32 AM > Error : Invalid page format.
12/22/2010 10:31:32 AM > Set group's info (lathe-list)
12/22/2010 10:31:32 AM > Authorization started
12/22/2010 10:31:34 AM > Authorization accomplished
12/22/2010 10:31:34 AM > Request number of messages
12/22/2010 10:31:35 AM > Error : Invalid page format.
12/22/2010 10:31:35 AM > Set group's info (millingmachinetalk)
12/22/2010 10:31:35 AM > Authorization started
12/22/2010 10:31:37 AM > Authorization accomplished
12/22/2010 10:31:38 AM > Request number of messages
12/22/2010 10:31:39 AM > Number of messages : 2145
12/22/2010 10:31:39 AM > Receive message : 2144
12/22/2010 10:31:40 AM > Received message from : getagripatlanta
12/22/2010 10:31:40 AM > Receive message : 2145
12/22/2010 10:31:40 AM > Received message from : getagripatlanta
12/22/2010 10:31:40 AM > Set group's info (multimachine)
12/22/2010 10:31:40 AM > Authorization started
12/22/2010 10:31:42 AM > Authorization accomplished
12/22/2010 10:31:42 AM > Request number of messages
12/22/2010 10:31:43 AM > Number of messages : 13155
12/22/2010 10:31:43 AM > Receive message : 13154
12/22/2010 10:31:44 AM > Received message from : Geronimo
12/22/2010 10:31:44 AM > Receive message : 13155
12/22/2010 10:31:44 AM > Received message from : Pat
12/22/2010 10:31:44 AM > Set group's info (NJ_LoganLatheOwners)
12/22/2010 10:31:44 AM > Authorization started
12/22/2010 10:31:46 AM > Authorization accomplished
12/22/2010 10:31:46 AM > Request number of messages
12/22/2010 10:31:47 AM > Error : Invalid page format.
12/22/2010 10:31:47 AM > Set group's info (OpenLathe)
12/22/2010 10:31:47 AM > Authorization started
12/22/2010 10:31:49 AM > Authorization accomplished
12/22/2010 10:31:49 AM > Request number of messages
12/22/2010 10:31:50 AM > Number of messages : 2786
12/22/2010 10:31:50 AM > Set group's info (southbendlathe)
12/22/2010 10:31:50 AM > Authorization started
12/22/2010 10:31:52 AM > Authorization accomplished
12/22/2010 10:31:52 AM > Request number of messages
12/22/2010 10:31:53 AM > Number of messages : 62425
12/22/2010 10:31:53 AM > Receive message : 62392
12/22/2010 10:31:55 AM > Received message from : Ed S
12/22/2010 10:31:55 AM > Receive message : 62393
12/22/2010 10:31:55 AM > Received message from : rpm7200max
12/22/2010 10:31:55 AM > Receive message : 62394
12/22/2010 10:31:55 AM > Received message from : Fred Husher
12/22/2010 10:31:55 AM > Receive message : 62395
12/22/2010 10:31:55 AM > Received message from : unclekent
12/22/2010 10:31:55 AM > Receive message : 62396
12/22/2010 10:31:55 AM > Received message from : viajoaquin@...
12/22/2010 10:31:55 AM > Receive message : 62397
12/22/2010 10:31:55 AM > Received message from : Cal
12/22/2010 10:31:55 AM > Receive message : 62398
12/22/2010 10:31:55 AM > Received message from : Cal
12/22/2010 10:31:55 AM > Receive message : 62399
12/22/2010 10:31:55 AM > Received message from : John DeBrular
12/22/2010 10:31:55 AM > Receive message : 62400
12/22/2010 10:31:55 AM > Received message from : Nelson T.
12/22/2010 10:31:55 AM > Receive message : 62401
12/22/2010 10:31:55 AM > Received message from : John DeBrular
12/22/2010 10:31:55 AM > Receive message : 62402
12/22/2010 10:31:55 AM > Received message from : Nelson T.
12/22/2010 10:31:56 AM > Receive message : 62403
12/22/2010 10:31:56 AM > Received message from : James Early
12/22/2010 10:31:56 AM > Receive message : 62404
12/22/2010 10:31:56 AM > Received message from : Allen Knack
12/22/2010 10:31:56 AM > Receive message : 62405
12/22/2010 10:31:56 AM > Received message from : Jim B
12/22/2010 10:31:56 AM > Receive message : 62406
12/22/2010 10:31:56 AM > Received message from : Allen Knack
12/22/2010 10:31:56 AM > Receive message : 62407
12/22/2010 10:31:56 AM > Received message from : Jim B
12/22/2010 10:31:56 AM > Receive message : 62408
12/22/2010 10:31:56 AM > Received message from : rpm7200max
12/22/2010 10:31:56 AM > Receive message : 62409
12/22/2010 10:31:56 AM > Received message from : Jim B
12/22/2010 10:31:56 AM > Receive message : 62410
12/22/2010 10:31:56 AM > Received message from : George Taylor, IV
12/22/2010 10:31:56 AM > Receive message : 62411
12/22/2010 10:31:56 AM > Received message from : Ed S
12/22/2010 10:31:56 AM > Receive message : 62412
12/22/2010 10:31:56 AM > Received message from : Jim B
12/22/2010 10:31:56 AM > Receive message : 62413
12/22/2010 10:31:56 AM > Received message from : peribeca@...
12/22/2010 10:31:56 AM > Receive message : 62414
12/22/2010 10:31:56 AM > Received message from : Nelson T.
12/22/2010 10:31:56 AM > Receive message : 62415
12/22/2010 10:31:56 AM > Received message from : Nelson T.
12/22/2010 10:31:56 AM > Receive message : 62416
12/22/2010 10:31:56 AM > Received message from : Jim B
12/22/2010 10:31:56 AM > Receive message : 62417
12/22/2010 10:31:56 AM > Received message from : bradjacob@...
12/22/2010 10:31:56 AM > Receive message : 62418
12/22/2010 10:31:56 AM > Received message from : Jim B
12/22/2010 10:31:56 AM > Receive message : 62419
12/22/2010 10:31:56 AM > Received message from : Dennis Turk
12/22/2010 10:31:56 AM > Receive message : 62420
12/22/2010 10:31:56 AM > Received message from : Brad Jacob
12/22/2010 10:31:56 AM > Receive message : 62421
12/22/2010 10:31:56 AM > Received message from : five_legged_pony
12/22/2010 10:31:56 AM > Receive message : 62422
12/22/2010 10:31:57 AM > Received message from : James Early
12/22/2010 10:31:57 AM > Receive message : 62423
12/22/2010 10:31:57 AM > Received message from : five_legged_pony
12/22/2010 10:31:57 AM > Receive message : 62424
12/22/2010 10:31:57 AM > Received message from : five_legged_pony
12/22/2010 10:31:57 AM > Receive message : 62425
12/22/2010 10:31:57 AM > Received message from : Nelson T.
12/22/2010 10:31:57 AM > Set group's info (UNIMAT)
12/22/2010 10:31:57 AM > Authorization started
12/22/2010 10:31:59 AM > Authorization accomplished
12/22/2010 10:31:59 AM > Request number of messages
12/22/2010 10:32:01 AM > Error : Invalid page format.

Wilson Logan · December 24, 2010, 09:46:23 AM

Hi Manfred,

If you've got a problem with some groups but not all, it is a certainty that the problem is your Yahoo groups logon. Or more accurately, PGO's ability to log you on.

The groups that are working will be the public groups and the groups that don't work will require membership to view the message archive.

Yahoo periodically requires users to verify their logon details even if these details are cached in their browser. Because PGO uses the cached logon information to do its logging on when yahoo requires verification PGO does not know what to do.

The solution should be, log in to Yahoo groups using Internet Explorer. Stop IE, start PG Offline and it should work.

Cheers,

Wilson.

Manfred · December 28, 2010, 12:33:38 PM

Well ...followed your instructions...This doesnt look good

12/28/2010 7:30:47 AM > Set group's info (3_in_1_Lathe_Mill_Drill)
12/28/2010 7:30:47 AM > Authorization started
12/28/2010 7:30:48 AM > Error : A connection with the server could not be established
12/28/2010 7:30:48 AM > Set group's info (AA_109_Lathe_Users_Group)
12/28/2010 7:30:48 AM > Authorization started
12/28/2010 7:30:49 AM > Error : A connection with the server could not be established
12/28/2010 7:30:49 AM > Set group's info (atlas_craftsman)
12/28/2010 7:30:49 AM > Authorization started
12/28/2010 7:30:50 AM > Error : A connection with the server could not be established
12/28/2010 7:30:50 AM > Set group's info (Atlasshaperandmillingmachineusersgroup)
12/28/2010 7:30:50 AM > Authorization started
12/28/2010 7:30:51 AM > Error : A connection with the server could not be established
12/28/2010 7:30:51 AM > Set group's info (BurkeMills)
12/28/2010 7:30:51 AM > Authorization started
12/28/2010 7:30:52 AM > Error : A connection with the server could not be established
12/28/2010 7:30:52 AM > Set group's info (clausing_lathe_and_mill)
12/28/2010 7:30:52 AM > Authorization started
12/28/2010 7:30:53 AM > Error : A connection with the server could not be established
12/28/2010 7:30:53 AM > Set group's info (gingery_machines)
12/28/2010 7:30:53 AM > Authorization started
12/28/2010 7:30:54 AM > Error : A connection with the server could not be established
12/28/2010 7:30:54 AM > Set group's info (lathe-list)
12/28/2010 7:30:54 AM > Authorization started
12/28/2010 7:30:55 AM > Error : A connection with the server could not be established
12/28/2010 7:30:55 AM > Set group's info (millingmachinetalk)
12/28/2010 7:30:55 AM > Authorization started
12/28/2010 7:30:56 AM > Error : A connection with the server could not be established
12/28/2010 7:30:56 AM > Set group's info (multimachine)
12/28/2010 7:30:56 AM > Authorization started
12/28/2010 7:30:57 AM > Error : A connection with the server could not be established
12/28/2010 7:30:57 AM > Set group's info (NJ_LoganLatheOwners)
12/28/2010 7:30:57 AM > Authorization started
12/28/2010 7:30:58 AM > Error : A connection with the server could not be established
12/28/2010 7:30:58 AM > Set group's info (OpenLathe)
12/28/2010 7:30:58 AM > Authorization started
12/28/2010 7:30:59 AM > Error : A connection with the server could not be established
12/28/2010 7:30:59 AM > Set group's info (southbendlathe)
12/28/2010 7:30:59 AM > Authorization started
12/28/2010 7:31:00 AM > Error : A connection with the server could not be established
12/28/2010 7:31:00 AM > Set group's info (UNIMAT)
12/28/2010 7:31:00 AM > Authorization started
12/28/2010 7:31:01 AM > Error : A connection with the server could not be established

Everything works fine looking with IE

PG Offline

News:

Error

Manfred

Manfred

Wilson Logan

Manfred